| Schlüsselwort | Unterirdische Bohrmaschine |
|---|---|
| Lochdurchmesserstrecke | 41-89 mm |
| Lochtiefe | 3,440 mm |
| Größe und Länge der Bohrstange | T38-H35-R32*3700 mm |
| Gesamtlänge | 3,500 mm |
| Schlüsselwort | Unterirdische Bohrmaschine |
|---|---|
| Lochdurchmesserstrecke | 41-89 mm |
| Ausfallgröße in mm | 5270 |
| Schleudern (mm) | T38-H35-R32/5525 |
| Abdeckungsfläche der Bohrungen ((m2) | 180 |
| Maximale Bohrtiefe | 200 Meter |
|---|---|
| Bohrdurchmesser | 90 bis 315 mm |
| Bit-Typ | DTH Bit/Tricone Bit |
| Bohrweg | Dreh- und Schaltmaschinen |
| Typ | Raupenart |
| Recommended DTH hammer size: | 6"(Optional 7"/8") |
|---|---|
| Drill pipe handling capacity: | 4+1 |
| Drill pipe length: | 7 M ( Optional 5 / 6 M ) |
| Air compressor | 25 Bar(362.5 Psi),33 M3 / Min |
| Hole range | 152 ‒ 203 Mm |
| Transportmaße | 12,560*2,700*3,560 mm |
|---|---|
| Drehgeschwindigkeit | 0 bis 80 U/min |
| Länge des Bohrrohrs | 7 M (fakultativ 5 / 6 M) |
| Gewicht | 25,000kg |
| Maximale Bohrtiefe bei automatischer Handhabung | 35 M |
| Empfohlene DTH-Hammergröße | 6" (optional 7"/8") |
|---|---|
| Drehgeschwindigkeit | 0 bis 80 U/min |
| Überschüssiger Druck des Bohrrohrs | 114 mm (fakultativ 102 / 127 mm) |
| Höchstdrehmoment | 5,600 N.m. |
| Kapazität der Bohrrohre | 4+1 |
| Baumart | Schwerlast-Einfachbohrer |
|---|---|
| Maximale Bohrtiefe bei automatischer Handhabung | 35 M |
| Höchstdrehmoment | 5,600 N.m. |
| Transportmaße | 12,560*2,700*3,560 mm |
| Luftkompressor | 25 Bar ((362,5 Psi),33 M3 / Min. |
| Luftkompressor | 25 Bar ((362,5 Psi),33 M3 / Min. |
|---|---|
| Kapazität der Bohrrohre | 4+1 |
| Drehgeschwindigkeit | 0 bis 80 U/min |
| Transportmaße | 12,560*2,700*3,560 mm |
| Höchstdrehmoment | 5,600 N.m. |
| Drehgeschwindigkeit | 0 bis 80 U/min |
|---|---|
| Höchstdrehmoment | 5,600 N.m. |
| Luftkompressor | 25 Bar ((362,5 Psi),33 M3 / Min. |
| Kapazität der Bohrrohre | 4+1 |
| Transportmaße | 12,560*2,700*3,560 mm |
| Luftkompressor | 25 Bar ((362,5 Psi),33 M3 / Min. |
|---|---|
| Transportmaße | 12,560*2,700*3,560 mm |
| Empfohlene DTH-Hammergröße | 6" (optional 7"/8") |
| Maximale Bohrtiefe bei automatischer Handhabung | 35 M |
| Länge des Bohrrohrs | 7 M (fakultativ 5 / 6 M) |